![]() ![]() There are many types of paint available today, some giving different surface finishes, others designed for particular applications. For paint to adhere to a surface, the first coat (normally the 'Primer') must provide a 'key' into the base material (so that paint does not just fall away) and to provide a surface for the other coats. WHEN USING MORE THAN ONE TIN COLOUR IN THE SAME ROOM, INTERMIX BEFORE USE.What is paint? - gloss paints - non-drip paint - othersĪlthough paint is a very common material, paint technology is a complicated science. If accidental contact occurs, rinse eyes with copious amounts of water. Do not empty product into drains or watercourses.Ĭolour variation can occur between batches due to the natural pigments used, therefore, it is recommended that all Francesca’s Eco Emulsion be purchased at the same time. Wash tools immediately after use in warm soapy water and rinse thoroughly. Remove as much product as possible from application equipment before washing. Avoid retouching the final coat.ġst coat: dilute with 30% of water / 2nd coat: dilute with 25% of water (light colours)ġst coat: dilute with 10% of water/ 2nd coat: dilute with 5% of water (medium/dark colours)ġ litre covers approximately 12 square metres per coat depending on the porosity of surface Do not apply in temperatures below 5C or over 30C. FOR MEDIUM / DARK COLOURS WAIT 24 HOURS TO APPLY SECOND COAT. Leave at least 6 hours before applying a second coat. DON’T OUTLINE FIRST AND FILL IN AFTER, OTHERWISE A LINE WILL SHOW. Remember that the paint must be applied on a dry surface.įrancesca’s Eco Fix is to be used on cement render, powdery plastered walls, concrete and LIME PLASTERįrancesca’s Eco Emulsion can be applied by brush, roller and spray gun. Over previously painted walls: if the paint is flaking remove as much old paint as possible by dampening the wall down and scraping it. Over unpainted internal walls: apply one coat of Ecofix diluted with 4 part of water to 1 of Ecofix ONLY if the wall is powdery to the touch and on lime plaster surfaces, the ratio might change slightly, it is important that the ecofis does not create a film as it has to penetrate the wall. OR MIST COAT USING OUR ECO EMULSION DILUTED WITH 40-50% OF WATER. VERY IMPORTANT: OVER UNPAINTED SURFACES THERE IS NO NEED TO MIST COAT THE WALL, APPLY THE ECO EMULSION DIRECTLY ON THE WALL FOLLOWING INFO BELOW. ![]() The base of the Eco Emulsion is plastic free.īefore application, surfaces must be cleared of loose material, grease and oil. Some of our darkest colours are not available in the Eco Emulsion because of the nature of the ecological base of the paint. It is the best emulsion to use in a bathroom because of its breathability and water resistance. It is not scrubbable and cannot be touched up. Francesca’s Eco Emulsion is gently wipeable (absorbent stains will stay). This Eco Emulsion is for use on interior walls and ceilings with a chalky, velvety finish. It has excellent coverage and is perfumed with a citrus fragrance. It is ideal to cover most wall surfaces around the house because of its low impact on our health and the environment. ![]() The VOC of our eco emulsion is 0.6g/litre. Breathability in paint is essential as it allows the passage of moisture, preventing walls from bubbling up.įrancesca’s Eco Emulsion is free from solvent and their components glycol and microplastic. It is a water based emulsion paint with an SD value of 0.003 making it completely breathable. Francesca’s Eco Emulsion is the most ecological of our emulsions. ![]()
0 Comments
Leave a Reply. |